Free DHL/UPS Shipping to the United States, Canada, Europe, Australia, Japan and more


Your Cart is Empty

CEIKA Air Ride Coilover Kit for NISSAN Z11 CUBE TYPE 1 (02~08)


CEIKA Air Ride Suspension kit with Fully Adjustable Coilovers

Our street & race proven coilover technology paired to an air suspension system giving you the best compromise in handling and comfort between OEM & Coilovers.

Fully adjustable comfort, handling and height by air pressure and shock length adjustment with our fully threaded coilover bodies.  

36 "Clicks" Damper Stiffness Adjustment to suit your preferred air pressure and ride height.

Choose from a bare CEIKA Coilovers kit with bags and build your own system or select one of our Complete Air Ride System below:


This is the simplest kit.
It does not come with fancy remote but the manual switch panel with allow to adjust front and rear pressure with two pneumatic switches. Air hoses will need to be routed to the switch panel.


Remote Adjustability kept simple.
 This kit comes with a simple key ring remote, an electronic switch panel with pressure gauge and a small controller unit that allow to control a x4 Solenoids Valve manifold. It does not store pressure/height presets.


Display Remote with height presets and a more sophisticated Controller Unit packed with more Air Ride Control technology. This 4-way adjustable kit allows to adjust each corner up or down independently. It uses x8 Solenoids in a bigger valve manifold which provides a more precise control as well as a quicker inflation/deflation speed.

You can use the 4-Way system with the Display Remote and Key Ring Remote to adjust the height manually or using saved presets.

You can also upgrade to a Height Levelling Sensor Kitwhich allows to save presets based on actual corner height instead of corner pressure.

Why choose CEIKA?
Since 2010, every CEIKA order is unique and fine tuned to match each use. Our customer service is dedicated to provide all the help and guidance you may need to complete your installation and fine tuning.  

All our shocks are custom valved and dyno tested so that you will be guaranteed to get the closest ride quality and handling desired.

Compared to our 2M kits the 1M allow for ease of adjustability with a single 30-clicks adjustment knob providing matching adjustment of both compression and rebound together.

Please make sure that your car model matches the product title above before ordering. Regardless, we will confirm the details with you within 24h during week-days before confirming/shipping your order to avoid any mistakes. You will receive a complete bolt-on suspension system with the exact same bolting design/pattern as OEM. Custom built, developed and already fitted and approved for your car model.

The pictures above are generic and you will receive a complete bolt-on suspension system with the exact same bolting design/pattern as OEM. Custom built, developed and already tested on your car models and variant. This is why it is also important that the right car model is selected. 

Our CEIKA Coilovers have been used since 2010 in all kind street and track cars: World Time Attack, King of Europe, GT3 racing and more. 


  • 2 Year Warranty and perfect fitment guaranteed

  • Increased steering feel, response and predictability with our high performance valves and high quality dual rate air bags.
  • Improved traction and braking performance by reducing weight transfers and body-roll.
  • High Quality Progressive Dual Bellow Air Bags or Air Sleevesdepending on your car model.
  • Base adjustable height 10 to 15cm range (depending on applications). Full threaded shocks allowing independent height adjustment from spring preload/shock travel. 
  • High quality CNC machined from non-recycled alloys with ISO9001:2008 quality control.
  • Excellent longevity and fully rebuildable. Our custom shocks, valves, components, seals and high performance oil allow us to have a close to zero amount of rebuild or failure/shock leakage. Even after over 10 years of street or  racing use. 



    • 2 years warranty against manufacturing defect on Coilovers, Airbags, Compressor, Controller Units and Parts.
    • Direct bolt-on install guaranteed. 
    • We will send you revised or replacement parts free of charge if anything does not fit or perform as it should.



      • We will confirm your order details and specs within 24 hours.
      • We have most parts and mounts in stock and depending on your spring rates and valving we can make your custom kit within 10 to 14 working days with standard spring rates and valving. 
      • Free Shipping Worldwide from our factory in Taiwan. Shipping takes 2 to 4 working days Worldwide via DHL/UPS. Remote areas, allow for 2 extra days.

      Customer Reviews

      Based on 646 reviews
      Zack (Fort Collins, US)
      2013 Lexus RX450h

      Installation was super easy. Rides amazing.

      John Paine (Lahaina, US)
      Not much change

      I’ve driven around on my new shocks for a few weeks now and I haven’t noticed any difference from these vs my old ones. They are good, but aren’t really as comfortable as I thought they would be.

      Jose Cantoran (Hutto, US)
      Fit Great on my 1984 300zx

      Fit was exact and they were able to accommodate the modifications on my car. Very happy with the new Coilovers.

      Scott Hoover (Statesboro, US)
      Lexus LS460 Marshmallow ride correction.

      The LS460 is a powerful sedan with sophisticated suspension that has the potential for great handling. However, stock spring rates are very soft, and there is lots of body movement during dynamic driving. Just got these installed. I wanted somewhat stiffer springs rates to get rid of the Lexus marshmallow wallow. However, these are a bit stiffer than I would have preferred. Very firm by comparison. Seem like high quality and well engineered assemblies. Be aware these do not come ready to bolt on and go. The overall length is not set. They are shipped at minimum length with lock ring loose. I wanted stock ride height to less than 1" lower. I started with overall length at 1/2" less than stock. It took some fussing to get the rears set due to the stiffer springs and preload, there was not nearly as much sag as stock. Back of the car wound up ~ 1" higher than stock even though I set the overall length to 1/2" less than the stock units. Took some fussing with the preload and length to get it right. Having said that, handling is great, and ride OK on relatively smooth surfaces. I am interested to see how it does on freeway expansion joints. There are not any options for more sporty conventional shocks for the LS460, or "heavy duty" stock replacement springs which led me to the Ceika option. Not knowing the stock spring rates I could not be more specific on the rates I wanted other than I wanted more of a Mercedes / BMW ride as opposed to Lexus Marshmallow. What I got certainly eliminated the wallow but is somewhat stiffer than I would like.

      Grant Kristoff (Fullerton, US)

      Honestly not blown away. I wish the comfort option felt more like stock. Also the bracket for the brake line isn’t close at all. Needs to be 3 inches higher on the assembly.