Kit freni maggiorati CEIKA su misura per Mercedes-Benz W111 / W112 (59~68)

INCLUDES:
- High performance radial mount calipers (Forged 6061-T6 alloy).
- 2-pcs floating rotores with alloy hats (full-floating rotores available).
- Teflon/stainless steel DOT/ADR compliant freno lines (made in UK).
- Direct bolt-on caliper mounting brackets and bolts.
- Freno pads (Can also be purchased from other brands).
- All necessary mounting hardware for direct bolt-on install.

CALIPER SPECS:
Forged 6061-T6 aerospace grade alloy 2-piece calipers.
- Radial mount design for less flex.
- Pistons available in 6061-T6 alloy with anti-corrosion coating, or stainless steel.
- Dual seals with high temperature resistant oil ring and dust scrappers.
- Stainless steel bleed screw.
- Carbon steel caliper adapter for direct bolt-on installation guaranteed.
-Teflon and stainless steel freno lines DOT/ADR approved with banjo bolt. Freno lines hoses are direct fit and manufactured in UK.
- CNC machined logo.
- Anti-corrosion coating + custom color finish: "anodized" or "anodized + gloss paint".

ROTOR SPECS:
- 2-piece floating rotores with 6061-T6 aerospace grade alloy hat. Fully balanced.
- Rotore ring in FC30 cast iron with anti corrosion coating.
- Drilled / slotted / drilled and slotted rotore ring available at no extra cost. (We advise drilled for street and slotted only for track and race applications).
- Curved vanes ventilation for optimal cooling.
- Full-floating rotores use floating hardware with anti-rattle system (removable and rebuildable). It provides a lower tendency to warp, less drag and wear as the rotore ring centers itself with the pads. Available for 330mm rotores and bigger only. The semi-floating rotore uses standard bolts instead and the rotore is fixed on the hat.
- Custom rotore hat anodized color.

Front rotore size available (mm): 330x28; 330x32; 345x32; 356x32; 365x32; 380x32; 380x34; 405x36; 430x36
Rear rotore size available (mm): 330x28; 345x28; 356x28; 356x32; 365x32; 380x32; 405x34

You car requires this type of parking freno system for the rear kit: electronic parking freno.
Other systems are available for custom builds.

Maximum rotore diameter/kit size per wheel diameter (for reference only). For precise fitment check please refer to the freno template tab below.

15" wheel: 286mm

16" wheel: 304mm

17" wheel: 330mm

18" wheel: 356mm

19" wheel: 380mm

20" wheel: 405mm

Click to download the template file, print (check that the scale is right), cut around the dotted line and apply inside your wheel to check clearances:

Please contact us so we can add the templates for this model.

We have four compounds of freno pads to give you high performance braking, depending on your driving conditions. You can see the description of each compound below.
You can also use other freno pad brands (such as Alcon, AP Racing, Brembo, Ferodo, Hawk, Mintex, PAGID, Porsche, Wilwood and more) with our calipers.
You can purchase an extra set of freno pads with your kit, if you like, from the replacement parts section. We have the following compounds available:

- Street pads (Grey)
For street use, providing no noise, very little dust, good braking power and friction both at low and high temperatures.
These are specifically designed in order to provide good bite and feel as well as good longevity of the pads and rotores.
Optimal temperature range: 0~500°C
Maximum temperature: ~550°C
Coefficient of friction: 0.38~0.45

- Sport pads (Blue)
For street/track use, providing low noise, little dust, high braking power and friction both at low and high temperatures.
These are specifically designed in order to provide stronger bite and race feel as well as good longevity of the pads and rotores.
Optimal temperature range: 0~550°C
Maximum temperature: ~600°C
Coefficient of friction: 0.40~0.50

- Race pads (Red)
For race use only: for maximum braking power, bite and friction. Those freno pads are noisy, they will wear out the rotores faster than the street pads and produce more dust. The operating temperature range is higher and it is not safe for everyday street use.
However, they are a must for a race car or track day providing a consistent and predictable strong braking and longevity at high temperatures. Feel free to request two sets of pads if you want a set for street and a set for race for your weekend warrior.
Optimal temperature range: (100~700)°C
Maximum temperature: ~750°C
Coefficient of friction: 0.42~0.58

- Pro Race pads (Yellow)
For race use only: this is a new race compound that pushes the limits even further. We were able to achieve a much higher temperature range while offering a very high coefficient of friction for extreme race use conditions.
Optimal temperature range: (100~800)°C
Maximum temperature: ~850°C
Coefficient of friction: 0.58~0.68

'- 2 years on calipers casting, caliper parts, and seals.
- 2 years on mounting hardware and brackets.
- 2 years on freno lines. DOT/ADR approved
- 10,000km / 3 months on rotores.

Manufacturing takes around 15 working days depending on your specs and availability.

Shipping is 3 to 4 working days worldwide via UPS or TNT.

We will confirm your order within 24h.
If designing a kit from scratch, please allow us 10 working days extra for the designing and extra testing.